Development of a computer hybrid control system for continuous annealing furnace of hot dip galvanizing 热镀锌退火炉的计算机混合控制系统开发
Research on Automotive EPS Hybrid Control System and Its Theory, Design and Realization 汽车EPS混杂控制系统理论、设计及实现研究
A simplified component-oriented hierarchically hybrid control system in a distributed real-time platform is implemented to prove the feasibility and flexibility of our methodology. 在分布式实时平台上实现了一个简化的构件化分层异构控制软件系统验证方法的可行性和适应性。
The Design and Discussion of Hybrid control system in Float Glass Factory 浮法玻璃工厂混合控制系统的应用构想
The configuration and operation principle of the power APF with multiple PWM converters are introduced and analyzed. According to the control purpose, the digital-analog hybrid control system based on dual DSP is presented. 分析讨论了多重化大功率有源电力滤波器(APF)的基本结构及控制方法,设计了便于容量扩展的基于双DSP的数模混合控制系统。
Such a hybrid control system is highly robust to varying parameters. 这类混杂控制系统对参数变化具有很强的鲁棒性。
The effectiveness of the hybrid control system is discussed based on the seismic dynamic time history response of some specific structures. 通过具体结构的地震动力时程反应分析,对该混合控制结构的抗震性能作出了评价。
Seismic analysis of hybrid control system combined ( SATMD) with viscoelastic damper SATMD与粘弹性阻尼器相结合控制体系的地震反应分析
Research on Simulation of Intelligent PID Based on Hybrid Control System 基于混杂控制系统的智能PID的仿真研究
Research for Dynamical Optimization of Hybrid Control System of Active Control Combined with Base-isolation 基于主动控制&基底隔震混合控制系统的结构动力优化研究
Active control system and passive control system have disadvantages severally, but hybrid control system can make use of their advantages and overcome their disadvantages, and then extends the range of control system. 被动控制和主动控制系统都有各自不可克服的缺点,而采用混合控制系统则可充分利用二者的优点、克服二者的缺点,从而拓宽控制系统的应用范围。
To make a control system of manufacturing cells provided with characteristics of autonomy, cooperation, reconfiguration, maintainability etc., the hybrid control system architecture is presented for manufacturing cells based on the latest agent standards of Foundation Intelligent Physical Agent ( FIPA). 为了使制造单元控制系统具有自治性、合作性、可重构性及易维护性等特性,文章在FIPA-Agent技术规范的基础上,提出了制造单元混合式控制系统结构体系;
Some guidance opinions are given to design hybrid control system at last. 最后给出了混合系统设计的指导性意见。
According to this idea, the hybrid control system of active control combined with base-isolation, which is consisted of base-isolation and active controller, controlling the level distortion of rubber-bearing isolation through active controller, is researched in this thesis. 基于上述思想,本文研究了主动控制-基底隔震混合控制系统,即在隔震层连接主动控制器,通过主动控制器施加控制力来控制橡胶隔震器水平变形的混合控制系统;
Research on the Hybrid Control System of Robotic Hand Based on Image Recognition 基于多功能传感器的机器人手控制系统研究
A knowledge based hybrid control system for plate rolling process 中厚板轧制过程基于知识的混合控制系统
The AMD-TMD hybrid control system is investigated in the second part of this paper. 本文第二部分对AMD-TMD混合控制系统进行了系统的研究。
Analysis and Calculation for Stability Margin of Hybrid Control System 混合控制系统的稳定裕度分析与计算
Research on multi structural hybrid control system 多结构混合控制体系研究
A new layer model including man thinker layer about NCW based on the theory of the man-machine hybrid control system is proposed. And the core command and control system of NCW is analyzed. 运用复杂混合控制系统层次结构理论,提出了突出人作用的网络中心战层次模型,分析了网络中心战的核心指挥与控制系统。
Design of a class of hybrid control system 一类递阶混合控制系统的设计
The Research n Digital-Analog Hybrid Control System Of Large Power Electric Drive Equipment 大功率电气传动装置数字模拟混合控制系统的研究
The structure of the novel rotor current hybrid control system can evidently reduce the hardware cost and the complexity of control technique, and can respectively regulate the active and reactive output of the generator system. 该新型转子电流混合控制结构能显著降低转子变流器的硬件成本和控制技术的复杂性,在全速范围内实现输出有功和无功功率的独立调节。
Based on the instantaneous optimal control, the control law of a multi structural hybrid control system is suggested, and the computing simulation of a two structural hybrid control system is carried out. 基于瞬时最优控制的概念,提出了多结构混合控制体系的控制律。
The design of the intelligent PID controller based on the hybrid control system is introduced. 文章介绍了智能PID算法的思想,通过引入混杂控制系统,提出了应用混杂控制系统设计智能PID算法的思想。
It analyzes the combustion test-bed, which possesses a typical non-linear object, the features of inertia, pure lag, time-variable parameter, etc. Based on the characteristics of fuzzy control and PID control, it presents a hybrid control system. 针对燃烧实验台这一典型的惯性、纯滞后、参数时变非线性对象,在分析PID控制和模糊控制优缺点的基础上,提出了Fuzzy-PID混和控制方案。
The Modeling and Simulation of Vehicle Hybrid Control System 飞机混合式操纵系统的建模与仿真
Research of Optimization Scheduling and Simulation of Multi-Agent and Hybrid Control System in Engineering Machinery of Cluster 工程机械机群多主体混杂控制系统优化调度与仿真研究
This paper designed a wind-power hybrid control system based on PLC, and analysed the function of each factor to control system. 本文设计了基于PLC的风电混合动力控制系统,分析系统中各因素对控制系统的作用。
Secondly, the hybrid control system was modeled by using of object-oriented extended FSM and the conflict of the models was analyzed. 其次,利用了面向对象的扩展有限状态机对混合式控制系统进行了建模与冲突事件分析。